ALUMINUM CO2 CARBON DIOXIDE AIR TANK Off Road Beer Used With Regulator

Description

CO2 CARBON DIOXIDE TANK Off-road, Beverage, Welding & Beer System Air Tank
X1 USED 5# air tank. With regular, this weighs in at 24.5 lbs. the tank is 26.5” tall from bottom to the top of the valve. It’s 7” at the base. I will remove the regular and shipping it in the same box as the tank. Used for off road fast filling of tires.
Descriptions
Service Pressure: – 1800 psi / 124 bar
Specification: – DOT-3AL & TC-3ALM designed – ISO design
Alloy: – Manufactured from high strength aluminum alloy 6061-T6
Markings of a Standard CO2 Cylinder
The Department of Transportation (DOT) and Transport Canada (TC) require that cylinders made in compliance to their specifications be marked on the crown with certain information. Over the years the format used by Catalina Cylinders and Catalina East Division to display these markings has changed a few times. Shown below is an example of the current crown marking stamped on the standard 20 # CO2 cylinders manufactured at Catalina Cylinders, Garden Grove, CA. Under the example of the crown marking is a list of each of the specific crown markings, followed by a brief explanation of that marking. The descriptions of the markings are the same regardless of the different stamping formats used over the years .
Example of crown markings on a 20 # CO2 Cylinder:
DOT-3AL1800FXXXXXXX M4002 07C08 B20 U18 T25.2LB TC-3ALM124 T11.5KG CATALINA
Marking
Description
DOT-3AL
The U.S. regulatory authority, the Department of Transportation (DOT), and specification, 3AL, to which the cylinder is manufactured in compliance(required mark).
1800
The service pressure, in pounds per square inch (psi), of the cylinder (required mark).
FXXXXXXX
The serial number of the cylinder. For Catalina Cylinders, the serial number prefix of “F” is specific to the 20# CO2 cylinders followed by a seven digit number.
M4002
The M-number or Manufacturers Number issued by the DOT to the manufacturer, Catalina Cylinders.
07C08
The original hydrostatic test date of the cylinder, month followed by year, performed at the time of manufacture of the cylinder. The C represents the symbol of the Independent Inspection Agency (IIA) performing the inspection of and certifying the acceptance of the cylinder at the time of manufacture (required mark).
B15
The cylinder identifier (product name). It identifies the market, “B” for beverage, and capacity “20” for a capacity of 20# of CO2 charge, of the cylinder.
U18
The cylinder outlet thread designation as specified in CGA TB-16.
T25.2LB or TW25.0LBS
The tare weight (in lbs.) of the empty cylinder package. The empty cylinder package includes the cylinder, the valve, the carrying handle and the snap ring (required mark).
TC-3ALM
The Canadian regulatory authority, Transport Canada (TC), and specification, 3ALM, to which the cylinder is manufactured in compliance (required mark).
124
The service pressure of the cylinder expressed in metric units, bars (required mark).
CATALINA
The name of the manufacturer of the cylinder.
T11.5KG
The metric tare weight (in kgs) of the empty cylinder package. The empty cylinder package includes the cylinder, the valve, the carrying handle and the snap ring.
THE REGULATOR
This purpose-built performance regulator utilizes the high flow fixed flow brass regulator with a robust quick connect primarily designed for filling large offroad tires. Compare this non-freezing regulator output of 40CFM at 150PSI to a typical compressor rated at 4-5CFM with a maximum pressure of 150PSI. PREECE PRECISION will get you back on the trail without electricity - airing up tires, re-seating a bead, or running an impact.
Specifications: Designed for Carbon Dioxide (Co2) High flow capacity 40CFM (cubic feet per minute) Non-freezing under normal conditions Fixed Flow Static 150PSI CGA320 Tank Connection Soft seal washer included Brass body Brass tank connection Heavy duty universal brass quick connect 1/4" plugged accessory high pressure port.
WARNING: All accessories connected to the quick connect outlet MUST be designed for 150PSI WORKING PRESSURE.